T12A Soldering station
structure
1. soldering station
2. Temperature adjustment knob
3. LED display
4. Soldering iron socket
5. Cleaning sponge
6. Soldering iron tip
7. Soldering iron handle
8. Soldering iron base
The soldering station handle
Size：218mm
Lightweight handle handle with lightweight grip, no fatique when used for a long time
Handle base
Material ：Phenolic resin material
Cleaning cotton:Activated carbon cleaning cotton
Size：157*70*77mm
Anti-scaldinq, anti-static, stable socket base
1、Technical Specifications
Power Consumption ：75W
Output Temperature：200℃-480℃
Temperature Stability：stable / ±1℃
Ambient temperature：0-40℃
Handle cord assembly:1.2m
Display type:Three-digit display
Size: 130*88*38mm
Battery: 3V
Display: 1.3inch
Weight：610g
Time of Melt tin:<8s
Product Material :Metal
2、Application:
Can be used for mobile phone maintenance, computer maintenance, electronic components welding.
3、Features
(1) 8S Melt of tinFull power operation
When the soldering station is operated under 110-240 Voltage environment, lead-free tin wire can be used to achieve 8 seconds melt of tin.
(2) Sleeping time
Go into menu to set sleepng time, its setting range is 0-60 mins, default sleep setting time is 30 mins.
Default sleeping time is 30 mins,it means soldering station will go into stand still after 30 mins.and at the same time,the soldering station will entry to sleep state,temperature will drop to 150 ℃C.After press encoder,the soldering station will wake-up and temperature will be up to previous temperature before sleeping.
You can set the sleeping time according to your usage scenario and working habit, it will extend tip working life and protect your famlly safe.
(3) 1.3 inch display
Soldering station is made of aluminum alloy case, 1.3-inch display and environmentally acrylic to make the diaplay data more clear.
(4) silicone mat Installation
The silicone base is non-slip, wear-resistant, durable, and easy to operate.
4、Matters needed attention
（1）Before using tip,please be sure you have tightened the nut for soldering head to aviod falling and damaging the iron tip. The temperature will be reached above 350℃ after soldering station is usea for 40 minutes,and the temperature of the front end of the handle will be reached 50-60 ℃. When T12 tip is used first time, the temperature will jump and show ERROR on display, it is normal due to the heating of the inner galvanic couple part of the iror tip,after repeated use for several times,temperature will be more stable.
（2）The tip is not continuously working at high temperature, which is easy to damage the tip.
The melting point of common solder is 183℃, the melting point of lead-free solder is 227℃, and the general welding temperature is 300-380 ℃.
380°C is the boundary of temperature. When the temperature is higher than 380°C, the iron head will oxidize and lose rapidly, which will seriously affect the life of heating core.The temperature display above 380 °C will jump, the higher the temperature, the greater the jump.
（3）It is recommended to carry out welding at 300-380℃, most of the work can be carried out, and the temperature beating is normal, which will not affect the use!
The soldering iron used in this welding station is a brand new soldering iron head. Because the resistance of the new iron head is not stable, the temperature will jump or error, which is a normal phenomenon. After multiple use, the stability will gradually stabilize.
